Skip to main content
Rear Seat Armrest Replacement

NOTE: Take care not to tear the seams or damage the seatcovers.
  1. Remove the rear seat armrest (A).
    -1.
    Remove the rear center armrest garnish (B).
    -2.
    Remove the bolt (C) and pivot bolt (D) and wave washer (E) and plain washer (F) nylon washer (G), then remove the rear seat armrest.
    -3.
    If necessary, remove the collar (I).
  1. Install the armrest in the reverse order of removal, and note these items:
    If the collar and nylon washer are damaged or stress-whitened, replace them with new ones.