Skip to main content
Honda Fit Jazz GE6 GE8
Glass Roof Sunshade Cable Replacement
Remove the drive assembly.
Remove the screw, then remove the slide plate (A) from the rail on both sides.
Pull out the cable assembly (A) on both side.
Install the slide plate in the rail.
Insert the slider (A) on the end of the cable in the rail (B) of the frame.
Pull the cable forward, and fit the end (A) of the slider (B) to the stopper (screw) (C) in the front side of the rail.
Install the drive assembly.
Reset the sunshade control unit.