Skip to main content
Glass Roof Sunshade Frame Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
  • Put on the gloves to protect your hands.
  • Take care not to scratch the seat, dashboard, body and other related parts.
  1. Close the sunshade fully.
  1. Disconnect the motor connector (A).

  1. With an assistant holding the frame, remove the clip and the bolts, starting at the rear, and remove the glass roof sunshade frame (A). Do not hold the tube (B) of the drive assembly during removal.
  1. Install the frame in the reverse order of removal, and note these items:
    • When installing the frame, first put the positioning pin (C) in the hole of the body, then attach the clip.
    • Make sure the connectors are plugged in properly.
    • After all pares are installed, including the headliner, reset the sunshade control unit.